Ram Recalls 82,843 1500 Classic Pickups: Brake Lights Can Come On by Themselves
ABS module software in 2022–2024 trucks can also let the shifter leave Park without the brake applied. Dealers will reflash it; owner letters go out in January.

Ram is recalling 82,843 of its 2022–2024 1500 Classic pickups because the brake lights can come on with nobody touching the pedal. The same fault can let the truck be shifted out of Park without a foot on the brake.
The cure is a software update for the anti-lock brake module, according to the recall report FCA US filed with NHTSA on November 19. Only the old-body Classic is involved, not the current truck in our Ram 1500 vs. F-150 vs. Silverado comparison.
What goes wrong
The ABS controller works with a brake pedal position sensor, and pedal readings drift a little as a truck ages. FCA US says the software in these trucks doesn't adapt to that normal drift.
The filing lists three results: brake lights that light up without the pedal being pressed, a shifter that will leave Park without the brake applied and, eventually, the loss of electronic stability control, AutoPark, and forward collision warning.
Nothing warns the driver beforehand. Afterward, cruise control may stop working, and the dash may show a service brake system message or stability control, traction control, forward collision, and AutoPark lights.
FCA US estimates that every truck in the recall has the suspect software. All were built between September 12, 2022, and October 2, 2024, the day Classic production ended. The module supplier is Aumovio Systems.

How it surfaced
NHTSA raised the issue with the company in February, after a fleet filed seven complaints about brake lights staying on and stability control dropping out. Engineers then tracked down trucks with similar symptoms and pulled parts for analysis.
By October 21, FCA US had counted 6,001 warranty claims, 5,310 other service records, 48 field reports, and 12 customer assistance records that may be related. The oldest dates to May 2023. The company knows of one crash and no injuries.
This is the second ABS software recall for a Ram half-ton in just over two years, though for a different truck. In September 2024, FCA US recalled 1,227,808 current-generation Ram 1500s because their ABS module software could disable stability control. The Classic was not part of that campaign.
The Classic is the previous-generation pickup Ram kept building as an entry-level and fleet truck after the 1500 was redesigned for 2019. Stellantis said in August 2024 that production at Warren Truck Assembly in Michigan would end that year. Every affected truck is therefore already with an owner, and getting older work trucks back to dealers is the hard part. We have covered why recalled vehicles go unrepaired and what NHTSA wants to change.
What owners should do
Dealers will reprogram the ABS module at no charge. NHTSA's listing does not mark the fix as an over-the-air update, so plan on a dealer visit. FCA US has not said how long the reflash takes.
Dealers are due to be notified around November 26, the same day VINs become searchable in NHTSA's recall lookup. Owner letters are scheduled to start on January 14, 2027.
- NHTSA campaign number: 26V-756
- FCA US recall number: A9D
- Customer service: 800-853-1403
Neither NHTSA nor FCA US has told owners to stop driving the trucks. Owners who already paid for a related repair fall under the company's standard reimbursement plan, the filing says.
The campaign follows October's Ram ProMaster power steering recall covering 265,512 vans.


